Naim Nait Integrated Amplifier (1982)

Here we have an example of the original Nait from British experts Naim Audio with RED LED. The infamous Nait (Naim Audio InTegrated amplifier) was originally launched in 1983 although according to the companies information on serial numbers our example was actually built in 1982. It is in the Chrome-Bumper finish, half-width casework and comes in good condition, with a few minor blemishes - please see photographs. It will be supplied in original factory packaging with our standard three month warranty.
Naim Say….
An integrated amplifier has both the power amplifier and preamplifier stages of amplification fitted into a single case. This apparent simplicity requires a great deal of cunning.
Low continuous power output is balanced by a very large peak current capacity, so there are no restrictions on the size or type of loudspeakers that may be used.
The NAIT has three switch-selectable inputs, a phono input for moving magnet cartridges, a tuner input and a tape input. Either tuner or tape input may be used for compact disc. The tape socket combines input and output for recording and replay.
Tuner and tape connections are via 5-pin DIN sockets. Phono input is via RCA jack sockets.
The balance control affects the gain of the left channel only, plus or minus 3 dB relative to the right channel, which is fixed. Setting the knob in the central position will not necessarily provide a central image, so this position is not marked on the amplifier. To adjust the balance, volume should be set at an average listening level, and the left channel brought up or down until it suits you. Further adjustment may be desirable during use, since the amount of information on each channel varies with different sources. A change of volume setting from low to high can also have an effect on the image. This is not a fault, but a function of the type of potentiometer used.
Specifications:
Input sensitivities: Phono: 2.5 mV, 47 kΩ; Tuner and Tape: 75 mV, 47 kΩ
Tape Output Level And Impedance: 75 mV, 1 kΩ/source.
The mains earth (ground) should always be connected regardless of what other equipment is used with the NAIT.
Mains supply: 100 V, 110 V, 120 V, 200 V, 220 V or 240 V, 50 or 60 Hz
Dimensions: 205 (W) x 276 (D) x 76 (H) mm

Turnaround

Orders will usually dispatched within 2 working days of receiving cleared payment.

Shipping Rates

We calculate your shipping rate based on the total weight of your items and your delivery address. Standard shipping to the UK Mainland (excludes Northern Ireland, Isle of Man, Channel Islands) is free, except where specifically indicated. Don't worry, you'll always see the final shipping charge displayed before you reach the payment step (on the checkout page).

Carriers

We despatch the bulk of our UK mainland items on a 24 hour service.  Non-Mainland locations – Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as UPS and occasionally by a Pallet service.

Order Tracking

If a tracking # is provided by the carrier, we will update your order with the tracking information. Please note that some orders will not have tracking numbers.