Linn LP12 Turntable / Basik Plus Tonearm / K-9 Cartridge - Black Ash

Linn Sondek LP12 Turntable

Linn Products have always stated that the turntable is the most important part of a high fidelity system. If you don’t get a good signal off the record then it doesn’t matter how good the rest of your system is, the sound will be bad. When upgrading your system there is a strict hierarchy to observe. After the turntable, the next most important component is the arm, followed by the cartridge. Once the turntable system has been optimised, the next component to choose is the amplifier. Finally, the last link in the chain is the loudspeaker The Linn Sondek LP12 reference transcription turntable has been setting the standards by which others are judged for over 30 years.
Each component of the Sondek LP12 has been painstakingly developed to optimise information retrieval, because information lost at the source is lost forever, regardless of the amplifier or loudspeaker quality. Linn is involved in every stage of the record and playback process. We can therefore check the signal at each step of the hi-fi chain, which is why we know what makes the Sondek LP12 a very special turntable: its perfect speed accuracy at 33rpm and 45rpm, its immunity against acoustical feedback, its low noise main bearing with mirror finish, and our legendary precision manufacturing, all of which ensure the pitch accurate faithful reproduction of the original source.

Features

• Extremely low-noise patented main bearing
• Perfectly balanced high inertia platter
• Strong, solid kiln-dried wood plinth
• Heavy gauge non-magnetic, brushed satin, stainless steel plate
• Highly efficient 3 point spring damped suspension
• 24-pole precision synchronous low noise, high torque motor
• Precision pulley and Neoprene flat belt

Linn Basik Plus and Basik LV-X Tonearms

The Linn Basik Plus and Basik LV-X were designed according to many of the same criteria as the Linn Ittok LV-II. The Basik arms are intended to provide substantially better performance than has heretofore been available in a moderately priced tonearm, and will outperform arms which are vastly more expensive. They are the obvious choice for use on the Linn Sondek turntable, where monetary or other considerations preclude the use of the Ittok. They mount on the same armboard template as the Ittok, making a later upgrade extremely easy. They are also compatible with most transcription turntables, but it is well to remember that the turntable is by far the most important component. In our experience a Linn Basik tonearm with its original cartridge mounted on a Linn Sondek turntable will outperform a Linn Ittok tonearm with an Asak cartridge, mounted on any other turntable.
The Basik arms incorporate full gimbal ball bearings, and a large diameter straight arm tube. The Basik Plus utilizes a non-detachable headshell. The Basik LV-X incorporates a special detachable headshell which uses a C-clamping arrangement. This approach allows the headshell junction to be almost as rigid as a non-detachable type, at the cost of a slight increase of the effective mass of the arm. The Basik Arms are suitable for use with a wide range of magnetic cartridges. The Basik Plus, with its more rigid non-detachable headshell, is suitable for use with a variety of moving coil cartridges.

Linn Sondek LP12 Turntable

Introduced: 1972
Type: Belt drive analogue turntable with 3-point suspension
Platter: 2 pieces, made of non-magnetic Mazak 8. Production tolerance 0.025 mm, optimal weight distribution
Platter mat: Felt
Main bearing: 1-Point bearing, mirror finish, oil bath
Suspension: 3-Point-Subchassis, 3 adjustable precision springs
Motor: High torque 24-Pole Synchronous motor, fully screened and mechanically decoupled from main bearing
Drive: Neoprene flat belt, concentric precision pulley (0.01 mm)
Speed accuracy: 0.03%
Speeds: 33 rpm, 45 rpm
Power consumption: 13 W
Dimensions: 445 (W) x 356 (D) x 140 (H) mm - Approximately 70 mm required at rear and 250 mm above the unit to permit opening of lid
Weight 10.0 kg

Linn Basik Plus Tonearm

Effective Mass: 10 g
Tracking Force: 0 to 3 g
Cartridge Weight: 2 to 10 g
Effective Length: 229 mm
Overhang: 18 mm
Mounting Distance: 211 mm
Lateral Bearing Friction: < 50 mg
Horizontal Bearing Friction: < 50 mg

Turnaround

Orders will usually dispatched within 2 working days of receiving cleared payment.

Shipping Rates

We calculate your shipping rate based on the total weight of your items and your delivery address. Standard shipping to the UK Mainland (excludes Northern Ireland, Isle of Man, Channel Islands) is free, except where specifically indicated. Don't worry, you'll always see the final shipping charge displayed before you reach the payment step (on the checkout page).

Carriers

We despatch the bulk of our UK mainland items on a 24 hour service.  Non-Mainland locations – Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as UPS and occasionally by a Pallet service.

Order Tracking

If a tracking # is provided by the carrier, we will update your order with the tracking information. Please note that some orders will not have tracking numbers.