Musical Fidelity MX-HPA Headphone Amplifier - Silver

Here we have an example of the MX-HPA Headphone Amplifier from former British company Musical Fidelity. Able to cater for almost all types of headphones our unit comes in good condition. It is supplied in original factory packaging along with mains cable, manual and our normal three month warranty.
Musical Fidelity Say….
Years of experience in making high quality headphone amps have been distilled into the design of the MX-HPA. As a result, this fully-balanced headphone amp offers an awe-inspiring listening experience.
The MX-HPA’s technical performance is stunning. Typically, distortion from 20 Hz to 40 kHz is less than 0.005%. Signal-to-noise ratio is better than 120 dB (‘A’ weighted). Frequency response is ruler flat from 10 Hz to 20 kHz (- 0.1 dB).
The MX-HPA is capable of a short-term peak of 10 watts (for one cycle) and has two gain positions: 18 dB (8X) and 24 dB (15X). Inputs are either balanced or single-ended. The MX-HPA will automatically convert single-ended inputs to balanced. The MX-HPA is genuinely fully balanced from beginning to end.
Features:
Fully balanced, studio design, purist headphone amplifier
Incredible technical performance
Will drive any headphone with ease
Wide bandwidth: 10 Hz - 40 kHz at + 0, - 3 dB
Very low noise
Very low distortion: < 0.003%, 20 Hz to 20 kHz
Outstanding channel separation
Powerful, muscular, output into 32 ohms
Beautiful aesthetics and build quality
Specifications:
Power Output: 1.8 Watts per channel into 8 Ohms (27 dB W)
Maximum Output Voltage: 19 Volts RMS, 20 Hz to 20 kHz; onset of clipping (54 Volts peak-to-peak) balanced
Total Harmonic Distortion & Noise: > 0.005% typical, 20 Hz to 20 kHz
Signal to Noise Ratio: > 120 dB ‘A’-weighted
Input Impedance: 50 kΩ
Frequency response: + 0, - 0.1dB, 10 Hz to 20 kHz
Gain, LO position (volume max) 18 dB (8x)
Gain, HI position (volume max) 24 dB (15x)
Inputs: 1 pair line level XLR (balanced) connectors; 1 pair line level RCA connectors
Headphone Output: 1 pair 3-pin XLR/¼” stereo Jack combined sockets
Power Requirement: 90 - 250 VAC 50 - 60 Hz
Power Consumption: 15 W (maximum); < 0.25 W (standby)
Dimensions: 220 (W) x 240 (D) x 53 (H) mm
Weight: 2.2 kg

Turnaround

Orders will usually dispatched within 2 working days of receiving cleared payment.

Shipping Rates

We calculate your shipping rate based on the total weight of your items and your delivery address. Standard shipping to the UK Mainland (excludes Northern Ireland, Isle of Man, Channel Islands) is free, except where specifically indicated. Don't worry, you'll always see the final shipping charge displayed before you reach the payment step (on the checkout page).

Carriers

We despatch the bulk of our UK mainland items on a 24 hour service.  Non-Mainland locations – Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as UPS and occasionally by a Pallet service.

Order Tracking

If a tracking # is provided by the carrier, we will update your order with the tracking information. Please note that some orders will not have tracking numbers.