Audio Research DSi200 Integrated Amplifier - Silver

The DSi200 is our first product in the "Definition Series" showcasing a new technology that offers extremely high performance and value. Based on an advanced new design created entirely from the ground up by our engineering team, the DSi200 is built in-house by our own craftspeople.
The Definition Series of amplifiers represents an unusual type of "solid-state hybrid" design in which a massive, highly regulated, linear analogue power supply is combined with a truly "green" discrete analogue switching-MOSFET output stage for highly efficient power conversion and low power consumption. The analogue power supply and all-discrete MOSFET output stage are pure Audio Research expressions and do not rely on prepackaged modules or other "OEM" solutions common to amplifiers from other manufacturers.
Many music lovers have not favoured efficient switching amplifier designs because their sonics have been disappointing on an absolute basis. Class-D amplifiers could sound good but they did not possess the level of refinement found in the best discrete analogue class-AB designs. The DSi200 is not a typical switching amplifier with a switching power supply, and it doesn't sound like one - it will surprise you with its musical purity, low noise floor, uncanny resolution and startling dynamics.
The DSi200 delivers 200 WPC continuously into an 8-ohm load, 400+ WPC dynamically into 8 ohms, and 800+ dynamically into 4 ohms. In the real world, this allows the DSi200 to control large, power-hungry speakers with remarkable ease. All this is generated with almost no heat from a moderately sized enclosure – the DSi200 has earned an Energy Star rating.
The DSi200 is a fully balanced design offering two sets of balanced inputs and three sets of single-ended inputs. One set of single-ended inputs can be used as a normal line-level input or it can be converted into a home-theatre passthrough. This is important because the preamplifier section of the DSi200 is passive, so its preamplifier and amplifier sections cannot be separated. The DSi200's appearance is a modern evolutionary step for Audio Research that is both contemporary and familiar. The heavy front panel features Volume and Input selectors flanking a vacuum-fluorescent display. The brightness of the display can be adjusted to one of six levels, plus off-nine small pixels remain lit as a discreet reminder that the unit is powered on.
Control functions under the display are actuated via four small, round aluminium buttons; functions include Power, Mono, Invert, and Mute. The supplied remote control accesses these functions, plus a Left-Right balance control, and Display Up and Display Down controls. Silver handles are standard, but the most striking visual update may be the silver chassis that matches the handles and knobs. The DSi200 is also available with a black front panel, handles and knobs, but the chassis and wraparound cover will only be available in silver.
Connect the DSi200 to any speaker you have on hand and prepare to be amazed by how fluently this amplifier conveys the music from a soundstage that is wide and deep. It is rare to hear this level of articulation and purity from a single component, but the DSi200 has them both. Resolution is exceptional, with a presentation wonderfully relaxed because of its lack of grain and the absence of electronic artifacts. Fed by a high quality source, the DSi200 will have you playing recording after recording, revealing a captivating new level of performance from your speakers. It will not matter if you have inefficient or low impedance speakers because they will be controlled effortlessly. If an amplifier anywhere near its price ever deserves the overused accolade of "breakthrough," it should be the DSi200.

Power Output: 200 watts per channel into 8 ohms, 1% THD; 300 watts per channel into 4 ohms, both channels driven
Frequency Response: 5 Hz to 55 kHz (- 3 dB points at 1 watt)
Input Sensitivity: 0.93 Vrms for rated output (32.7 dB Gain) single-ended or balanced
Input Impedance: 60 kΩ single-ended; 120 kΩ balanced
Inputs: BAL 1, BAL 2, CD (SE), Tuner (SE), Aux (SE)
Maximum Input: 20 Vrms (BALANCED), 10 Vrms (SE)
Output Polarity: Non-inverting from single-ended inputs. Balanced pin 2+ (IEC-268)
Output Regulation: 0.06 dB, 8 Ω load to open circuit (Damping factor 167)
Output Current: 15 amps
Slew Rate: 5 volts/microsecond. (20% maximum duty cycle)
Rise Time: 5.0 microseconds
Hum & Noise: 800 microvolts RMS (94dB below rated output IHF A-weighted)
Power Supply Capacitance: 160,000 μF total
Power Requirements: 200 - 250 VAC 50Hz
Power Consumption: 735 W (Max); 445 W (Nominal); 38 W (Idle); 1 W (Standby)
Dimensions: 480 (W) x 400 (D) x 133 (H) mm
Weight: 16.9 kg

Turnaround

Orders will usually dispatched within 2 working days of receiving cleared payment.

Shipping Rates

We calculate your shipping rate based on the total weight of your items and your delivery address. Standard shipping to the UK Mainland (excludes Northern Ireland, Isle of Man, Channel Islands) is free, except where specifically indicated. Don't worry, you'll always see the final shipping charge displayed before you reach the payment step (on the checkout page).

Carriers

We despatch the bulk of our UK mainland items on a 24 hour service.  Non-Mainland locations – Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as UPS and occasionally by a Pallet service.

Order Tracking

If a tracking # is provided by the carrier, we will update your order with the tracking information. Please note that some orders will not have tracking numbers.