Rotel RA-11 Integrated Amplifier - Black

From Rotel comes this excellent RA-11 integrated amplifier. It is in very good condition and will be professionally packaged, with remote control, mains cable, manual and as always, our three month warranty.
Rotel Say….
This amplifier is a full featured, high performance component. All aspects of the design have been optimized to retain the full dynamic range and subtle nuances of your music. The unit has a highly regulated power supply incorporating a Rotel custom-designed toroidal power transformer. This low impedance power supply has ample power reserves, which enables the amplifier to easily reproduce the most demanding audio signals. This type of design is more expensive to manufacture, but it is better for the music.
The printed circuit boards (PCB) are designed with Symmetrical Circuit Traces. This ensures that the precise timing of the music is maintained and faithfully recreated. The circuitry uses metal film resistors and polystyrene or polypropylene capacitors in important signal paths.
It incorporates the high-end Wolfson WM8740 24-bit/192kHz DAC chip and five conventional analogue inputs, four S/PDIF digital inputs, and an Apple authorised USB input. The RA-11 can be controlled through either its front panel buttons, via a remote handset, or paired with an RT-12 and the Rotel Remote app for iPhone and iPad.
With a full complement of digital and analogue input connections, the RA-11 provides a solid 40 Watts per channel output in a slimline chassis, providing a great solution for small systems.
Specifications:
Continuous Power Output: 40 watts (20 Hz - 20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion: < 0.03% (20 Hz - 20 kHz)
Intermodulation Distortion: < 0.03% (60 Hz : 7k Hz, 4:1)
Frequency Response: 20 Hz - 15 kHz, ± 0.3 dB (Phono); 10 Hz - 100k Hz, ± 1 dB (Line)
Damping Factor: 180 (20 Hz - 20 kHz, 8 ohms)
Input Sensitivity / Impedance: 2.5mV / 47 kOhms (Phono); 150 mV / 24 kOhms (Line)
Input Overload: 180 mV (Phono); 5 V (Line)
Preamp Output / Impedance: 1 V / 470 Ohms
Tone Controls - Bass / Treble: ± 10 dB at 100 Hz / 10 kHz
Signal to Noise Ratio: 80 dB (Phono); 100 dB (Line)
Digital Section
Frequency Response: 10 Hz - 95 kHz (± 3.0 dB, MAX)
Signal to Noise Ratio: 100 dB
Input Sensitivity/Impedance: 0 dBfs/75 ohms
Pre-out/Impedance: 1.2 V/470 ohms (at - 20 dB)
Decodable front USB Digital Signals: WAV, MP3, WMA (up to 48K 16 bit)
Coaxial/Optical: SPDIF LPCM (up to 192k Hz 24 bit)
Power Requirements: 230V, 50 Hz
Power Consumption: 220 Watts; < 0.5 V (Stand-by)
Dimensions: 430 (W) x 342 (D) x 72 (H) mm
Weight: 6.39 kg

Turnaround

Orders will usually dispatched within 2 working days of receiving cleared payment.

Shipping Rates

We calculate your shipping rate based on the total weight of your items and your delivery address. Standard shipping to the UK Mainland (excludes Northern Ireland, Isle of Man, Channel Islands) is free, except where specifically indicated. Don't worry, you'll always see the final shipping charge displayed before you reach the payment step (on the checkout page).

Carriers

We despatch the bulk of our UK mainland items on a 24 hour service.  Non-Mainland locations – Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as UPS and occasionally by a Pallet service.

Order Tracking

If a tracking # is provided by the carrier, we will update your order with the tracking information. Please note that some orders will not have tracking numbers.