{"product_id":"musical-fidelity-m8-monoblock-power-amplifiers-black","title":"Musical Fidelity M8 700M Monoblock Power Amplifiers - Black","description":"\u003cp\u003eHere we have a large, imposing and extremely powerful pair of mono-power amplifiers from electronics specialists Musical Fidelity. These amplifiers come in very good condition with just a couple of minor marks and are supplied in original factory packaging along with manual, mains cable, 3.5mm jack trigger cable, cleaning cloth, gloves plus our standard three month warranty.\u003cbr\u003e\nMusical Fidelity Say….\u003cbr\u003e\nThe new M8-700m monobloc power amp is fully balanced, and offers a staggering 700 watts per monobloc, with stellar sound quality and technical performance.\u003cbr\u003e\nThe M8-700m has extremely low distortion, typically 0.001% at 1 kHz. At 20 kHz distortion is still below 0.005%. Distortion at 50 kHz (a ridiculous and unreasonable measurement, but revealing of the total amplifier performance\u003cbr\u003e\nnonetheless) is 0.02%. At 100 kHz, it is about 0.06%. These extraordinary measurements, and the extremely low high-frequency distortion, are highly significant sonically.\u003cbr\u003e\nThe noise ratio of the M8-700m is extremely low at -120 dB A-weighted.\u003cbr\u003e\nThe M8-700m has huge power reserves, producing 700 watts RMS into 8 ohms and just on 1300 watts into 4 ohms. It is an absolute powerhouse.\u003cbr\u003e\nThe power, low distortion and the extremely low noise contribute to its fabulous, effortless sound.\u003cbr\u003e\nThe M8-700m is extremely powerful and dynamic. The sound is sweet, clear and uncoloured. Dynamics are massive and are delivered with instantaneous speed, both starting and stopping.\u003cbr\u003e\nThe M8-700m sound stage is huge, wide and deep. It creates large amounts of air and space, and is holographic in its presentation.\u003cbr\u003e\nSimilar in size and design package to the M6 500i, the M8-700m offers a compelling combination of fully balanced circuitry, extraordinary technical performance, exquisite sound, intelligent packaging and value for money makes a\u003cbr\u003e\ncompelling case.\u003cbr\u003e\nFeatures:\u003cbr\u003e\nFully balanced, monster power 700W per monobloc\u003cbr\u003e\nStaggering technical performance\u003cbr\u003e\nHuge peak current delivery\u003cbr\u003e\nIncredible load driving ability, will drive any loudspeaker with any cable\u003cbr\u003e\nExcellent design, he-man build quality\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nPower output: 700 Watts per channel into 8 Ohms (28 dB W)\u003cbr\u003e\nTHD(+ noise): \u0026lt;0.005% typical\u003cbr\u003e\nSignal to Noise Ratio: \u0026gt;120dB\u003cbr\u003e\nFrequency Response: +0, –1dB, 10Hz to 80kHz\u003cbr\u003e\nInputs: 2x RCA Phono Line Level; 1x Line level XLR Balanced; 1x Trigger input 3.5mm (1\/8”) mono jack ±4.5 to ±15V DC\u003cbr\u003e\nMains Voltages: 115\/230 V AC 50\/60 Hz\u003cbr\u003e\nPower Consumption: 0.25 W standby; 140 W idle; 1500 W maximum\u003cbr\u003e\nDimensions: 440 (W) x 460 (D) x 160 (H) mm\u003cbr\u003e\nWeight: 30.0 kg\u003cbr\u003e\nM8 Series - Maximum Performance For Minimum Cost\u003cbr\u003e\nThe primary design brief for the M8 Series was to achieve maximum performance for minimum cost. To do this, we studied how costs are allocated between the groups of components that make up an amplifier, namely:\u003cbr\u003e\nElectronic components such as resistors, capacitors, transistors, transformers, etc.\u003cbr\u003e\nHeatsinks (for power amps)\u003cbr\u003e\nFront panels\u003cbr\u003e\nGeneral metalwork\u003cbr\u003e\nElectronic components are relatively low cost. Top quality commercial components are abundant and easily available at competitive prices. You can get a lot of them for a few tens of pounds. Because of this, the quality of a circuit is not determined by the quantity or quality of components, but by the skill with which they are used. In other words, it is circuit design and PCB layout that are crucial to performance. In an expensive amplifier the electronic components are an insignificant proportion of the total cost.\u003cbr\u003e\nThough necessary, heatsinks do not contribute anything to sound quality. Although they are costly, their size and cost should be directly related to the power. If straightforward extrusions are used, the costs are directly proportionate to the power. As soon as you move into the realm of fancy, custom-machined heatsinks, the costs are disproportionately enormous – for no contribution to the sound quality.\u003cbr\u003e\nFront panels are another matter entirely. They do not contribute anything to a sonic performance and can cost an absolute fortune. Machining and finishing are very expensive.\u003cbr\u003e\nGeneral metalwork costs are conceptually similar to heatsinks and front panels.\u003cbr\u003e\nWhen you analyse where the money goes, all expensive, high-end amplifiers have at least 98% of their cost in front panels, metalwork and heatsinks.\u003cbr\u003e\nWe can see that they may look chic, some of them technical and most of them are exquisitely finished. We like fancy metalwork as much as anyone else, but it is unbelievably expensive. The question we ask ourselves is: Does any of this expensive metalwork contribute anything at all to the sound quality? The answer is: No, it does not.\u003cbr\u003e\nWith the vast majority of high-end amplification, what you are buying is fancy-looking metalwork (jewellery you might say). It may be beautifully designed and finished. It may impress your friends. But, in truth, it is only show with no effect on the true performance.\u003cbr\u003e\nWe at Musical Fidelity fervently believe that the reason the M8 Series exists is to offer top quality, state of the art performance at an intelligent price. To achieve this, the metalwork, front panels and heatsinks are purely functional.\u003cbr\u003e\nThe front panels are nicely finished custom made extrusions. There is nothing excessive. They are simply well made, functional, attractive front panels at minimum cost.\u003cbr\u003e\nThe heatsinks are custom made Musical Fidelity extrusions. They are nicely finished but with no excessive design nor any costly surface finishes. They are purely functional.\u003cbr\u003e\nAs with the front panels and heatsinks, the metalwork is designed for functionality with no excess.\u003cbr\u003e\nThe M8’s are almost Puritan in their dedication to delivering performance in a straightforward, nicely finished, honest package.\u003cbr\u003e\nIf you like fancy looking Hi-Fi, machined front panels, peak meters, heatsinks machined from exotic materials and all the other vocabulary of high-end excess, then the M8 Series is not for you. Sorry, that’s the way it is.\u003cbr\u003e\nOn the other hand, if you are interested in maximum musical and technical performance, and are not into Hi-Fi jewellery and display, then the M8 Series is made with you in mind.\u003c\/p\u003e","brand":"2ndhandhifi","offers":[{"title":"Default Title","offer_id":50986771808597,"sku":"PMG0104\/00051","price":4500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/1094\/5365\/files\/IMG_8313-scaled_fc633f57-a1e8-4263-8203-a853c4c3ad0e.jpg?v=1750878786","url":"https:\/\/2ndhandhifi.co.uk\/products\/musical-fidelity-m8-monoblock-power-amplifiers-black","provider":"2ndhandhifi.co.uk","version":"1.0","type":"link"}