{"product_id":"emotiva-basx-a-5175-power-amplifier","title":"Emotiva BasX A-5175 Power Amplifier","description":"\u003cp\u003eHere we have a five channel power amplifier from Emotiva. Ideal for use in a home cinema or A\/V set-up. It comes in good fully working condition, with a couple of marks\/dints to the casework – please refer to photographs. Supplied in original factory packaging along with mains cable, reprinted manual, trigger cable and our normal three month warranty.\u003cbr\u003e\nEmotiva Say\u003cbr\u003e\nOur BASX product line is dedicated to the philosophy that high-quality products that deliver true audiophile sound quality don’t need to be expensive to buy or complicated to configure and enjoy. Our BASX power amplifiers give you great sound quality, excellent technical performance, and outstanding value.\u003cbr\u003e\nThe BASX amps use a “classical audiophile architecture”, centred around a heavy-duty linear power supply, Class A\/B amplification, and the high current capability you need to sound great with even difficult to drive speakers. We’ve paid special attention to important details like heavy-duty audiophile grade binding posts and carefully laid out signal paths. And we’ve also included important high-end features like differential inputs, automatic line voltage detection, and microprocessor controlled status indicators and fault protection.\u003cbr\u003e\nThe BASX A-5175 delivers plenty of clean superb sounding audio power to drive almost any speaker to satisfying listening levels without the slightest hint of stress or strain. The BASX A-5175 is the ideal foundation for an economical but great sounding home theatre system, and the perfect way to upgrade your current home theatre system or AV receiver.\u003cbr\u003e\nIf you need superb sound, excellent build quality, and outstanding value, then you’ve come to the right place - Emotiva BASX.\u003cbr\u003e\nThe BASX A-5175 is an audiophile-grade power amplifier that provides five channels of superb quality audio amplification. The BASX A-5175 power amplifier features our fully discrete, high current, short signal path class A\/B output section, and a heavy duty linear power supply.\u003cbr\u003e\nWelcome to the BASX series of power amplifiers... proof that you can still get true audiophile sound quality, all the power you need to get great sound from even difficult to drive speakers, and real value... all in an attractive, well made package.\u003cbr\u003e\nFeatures:\u003cbr\u003e\nTrue audiophile-quality sound - as with all of our amplifiers, the BASX A-5175 power amp was designed first and foremost to sound superb in all types of audio systems\u003cbr\u003e\nGreat sounding Class A\/B output stage - ensures smooth detailed sound and incredibly natural imaging - without a trace of harshness or strain\u003cbr\u003e\nHeavy duty linear power supply - with an oversized toroidal power transformer and plenty of current capacity to drive even difficult speakers\u003cbr\u003e\nTop quality parts and construction throughout - promise years of reliable service\u003cbr\u003e\nTotally stable - designed for use in the real world, with real speakers\u003cbr\u003e\nHeavy steel 3RU chassis with milled aluminium face plate - provide strength and rugged good looks\u003cbr\u003e\nHeavy duty insulated five-way speaker binding posts - allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs\u003cbr\u003e\nRemote trigger input and output - allow the BASX A-5175 power amp to be turned on by trigger-enabled equipment, and to activate other trigger-enabled equipment\u003cbr\u003e\nAudiophile-grade fault protection - entirely transparent under normal conditions, yet protects the amp and your other equipment from all common fault conditions\u003cbr\u003e\nUniversal AC line voltage operation - the BASX A-5175 power amp was designed to operate on either 115 VAC or 230 VAC at 50\/60 Hz, and automatically detect and configure itself to operate with your local line voltage\u003cbr\u003e\nStandard IEC power inlet - fits all standard and audiophile IEC power cables\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nPower Output Per Channel; Two Channels Driven: 175 watts RMS \/ channel; 20 Hz - 20 kHz; THD \u0026lt; 0.1%; into 8 Ohms; 250 watts RMS \/ channel; 20 Hz - 20 kHz; THD \u0026lt; 0.1%; into 4 Ohms\u003cbr\u003e\nPower Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ \/ - 0.1 dB)\u003cbr\u003e\nBroad Band Frequency Response: 20 Hz to 80 kHz (+ 0 \/ - 1.5 dB)\u003cbr\u003e\nTHD + Noise: \u0026lt; 0.07% (A-weighted); at rated power; 1 kHz; 8 Ohms\u003cbr\u003e\nSignal to Noise Ratio (8 Ohm load): \u0026gt; 115 dB; ref rated power (A-weighted); \u0026gt; 95 dB; ref 1 watt (A-weighted)\u003cbr\u003e\nMinimum Recommended Load Impedance: 4 Ohms, which equals one 4 Ohm load or two paralleled 8 Ohm loads\u003cbr\u003e\nDamping Factor (8 Ohm load): \u0026gt; 500\u003cbr\u003e\nSpeaker Output Connections: Audiophile grade 5-way binding posts\u003cbr\u003e\nPower Supply: Linear power supply with heavy duty toroidal transformer\u003cbr\u003e\nInput Sensitivity (for rated power; 8 Ohm load): 1.2 V\u003cbr\u003e\nGain: 29 dB\u003cbr\u003e\nInput Connections: Unbalanced (RCA); one each per channel\u003cbr\u003e\nInput Impedance: 27 kOhms\u003cbr\u003e\nTrigger Input: 5 - 12 V (AC or DC); \u0026lt;10 mA input current required\u003cbr\u003e\nTrigger Output: 12 VDC; can drive any load up to 120 mA\u003cbr\u003e\nPower Requirements 115 VAC or 230 VAC @ 50 \/ 60 Hz (automatically detected)\u003cbr\u003e\nFront Panel Controls and Indicators: Standby; push button (halo ring changes colour to indicate Standby or On); Status LEDs; one per channel; blue. Status LEDs change to red to indicate a fault condition\u003cbr\u003e\nRear Panel Controls: AC Power switch; rocker switch (switches AC main power); Status LEDs switch; disables front panel Status LEDs\u003cbr\u003e\nProtection: The BASX A-5175 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions\u003cbr\u003e\nDimensions: 432 (W) x 419 (D) x 152 (H) mm\u003cbr\u003e\nWeight: 16.6 kg\u003c\/p\u003e","brand":"2ndhandhifi","offers":[{"title":"Default Title","offer_id":50986294673749,"sku":"3571719V010248","price":600.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/1094\/5365\/files\/IMG_8744-scaled.jpg?v=1750866726","url":"https:\/\/2ndhandhifi.co.uk\/products\/emotiva-basx-a-5175-power-amplifier","provider":"2ndhandhifi.co.uk","version":"1.0","type":"link"}