Sold

Rothwell MCX MC Step-Up Transformer

£290.00

Manufacturer : Rothwell
Model : MCX
Serial Number :
Packaging : Original
Accessories Included : Manual
Price When New : 

Out of stock

SKU: 949129 Category:
Description

Here we have an example of Rothwell Audio’s MCX MC step-up transformer. Not only does the unit allow moving-coil cartridges to be used with moving-magnet phonostages but it also gives them the chance to realize their full potential. It comes in very good condition, with original packaging, manual and our 3 month warranty.
Rothwell Say….
This step-up transformer uses the same high quality cores as used in the MCL, again supplied by Lundahl of Sweden, but features a lower turns ratio than the MCL to accommodate cartridges with higher outputs. The turns ratio of the MCX is 1:10, making it compatible with cartridges with outputs of up to 0.9mV, which includes models from Benz Micro, Clearaudio, Koetsu, Lyra and Van den Hul.
It features very wide bandwidth, low distortion and carefully designed primary and secondary loading networks to optimise the performance and give beautifully reproduced transients, free from ringing. The core materials and winding techniques employed in the manufacture are unsurpassed and feature multiple primary and secondary windings configured to cancel hum pickup from external sources as well as minimise inter-winding capacitance and maximise bandwidth. The step-up ratio of1:10 makes the MCX is compatible with a large selection of moving coil cartridges available today from makers such as Benz Micro, Clearaudio, Lyra, Koetsu, Ortofon, Audio Technica etc., but is particularly suited to cartridges with higher than average outputs, those in the range 0.6mV to 0.9mV.
Specifications
Turns Ratio: 1:10
Voltage Gain: 20dB (x10)
Core Material: Cobalt based uncut amorphous strip
Input Impedance*: 100 ohms
Optimum Load Impedance**: 47k + 150pF
Bandwidth: 8Hz – 75kHz (+0/-3dB)
Cartridge Compatibility (O/P): 0.35mV – 0.9mV
Cartridge Compatibility (Imp.): Internal impedance <20 ohms
Dimensions: 92 (W) x 155 (D) x 60 (H) mm
Weight: 580 g
*This is the load presented to the cartridge.
**This is the optimum load for the transformer, i.e. the input impedance of the phonostage that the MC1 feeds into.