Audio-Technica AT-LP3 Automatic Belt Drive Turntable – Black – Customer Return

Here we have a nice starter turntable from Japanese company Audio Technica. It is an example of the AT-LP3 automatic belt drive unit that is basically in as new condition as it is a customer return. It is supplied in original factory packaging along with all accessories and full manufacturer’s warranty.
Audio Technica Say….
Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
Features:
Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Balanced straight tonearm with hydraulically damped lift control and lockable rest
Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
Switchable modes for moving magnet and moving coil cartridges
AT91R Dual Moving Magnet phono cartridge and AT-HS3 universal headshell
Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
Damped base construction for reduced low-frequency feedback colouration
Specifications:
Turntable:
Type: Fully Automatic, Belt-Drive
Motor: DC motor
Speeds: 33 RPM, 45 RPM
Turntable Platter: Die-cast aluminium
Wow and Flutter: Less than 0.2% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio: > 60 dB
Output Level: “PHONO” (MM) 3.5 mV; “LINE” (MC) 220 mV (nominal at 1 kHz, 5 cm/sec)
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalised; 56dB nominal, RIAA equalised
Power Supply Requirements: 220 to 240 V / 50, 60 Hz
Dimensions: 435 (W) x 353 (D) x 128 (H) mm
Weight: 5.2kg
Tonearm:
Type: Static balanced straight shaped w/soft damping control
Effective Length: 221.5 mm
Overhang: 19 mm
Maximum Tracking Error Angle: Less than 3°
Stylus Pressure Adjustment Range: 1 to 4 g
Applicable Cartridge Weight Range (including headshell): 14.5 to 20 g
Cartridge and Headshell specifications:
Cartridge Model: AT91R
Cartridge Type: VM Dual Magnet
Recommended Load Impedance: 47,000 ohms
Output Voltage: 3.5 mV at 1 kHz, 5 cm/sec
Stylus: 0.6 mil bonded conical
Cantilever: Aluminium pipe
Tracking Force Range: 1.5 to 2.5 g (standard 2.0 g)
Cartridge Weight: 5.0 g
Headshell Model: AT-HS3
Headshell Weight: 11.1 g
Headshell Overhang Adjustment: 8 mm
Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable