Trigon TRV-100 Pre Amplifier – Black

Here we have an upmarket preamplifier from German company Trigon. The TRV-100 is a well specified unit and comes in good condition noting a few minor blemishes – please refer to photographs. It will be supplied in original factory packaging along with remote control unit, manual, mains cable plus our regular three month warranty.
Trigon Said….
This modular, upgradeable preamplifier, with its diverse connection and control options, acts as the central hub of your audio system, allowing for the integration of surround decoders or other peripherals. Digital volume and balance controls enable individual adjustment of input sensitivity for each input. All functions are remotely controllable. Operating status is indicated on the switchable LED display. The TRV-100 acts as the guide, mediator, and active amplifier for all incoming signals. Its gentle processing ensures superior sound quality.
The TRV-100 is a pre-amplifier of high quality with eight high-level-inputs and two separately switchable outputs. Two of the eight inputs as well as one output are supplied in symmetrical design. The inputs 7 and 8 can also be used as input for a tape-recorder because there are also two record-outputs belonging to these two inputs.
There are also two switched low-voltage-outputs (10V DC) for the running of amplifier and active loudspeaker with DC-remote control. Further Trigon-equipment, controlled by the TRV-100 can be connected to a 3-pole-D-sub-socket.
For the running of a high-ohmic head-phone there is a 6,3 mm phone plug at the front of the equipment.
Further the TRV-100 has got an input/output where special equipment like Surround Decoder, Equalizer etc. can be connected.
The amplifier is completely controlled by a uP in consideration of a good working separation of the analogous and digital circuits.
The operating of the pre-amplifier is possible at the equipment itself as well as by a IR-remote-control-unit. A clear display on th front of the pre-amplifier, which is dimmable and can be switched off, informs always about current positions. In the “Stand-by Modus” the equipment can be switched off by remote control unit.
Independent from the current program the Record-circuit allows copying any program-source.
The volume can be adjusted by a special D/A-converter, so it is much better than conventional volume control (Potentiometer) in respect to sound and technology.
Each of the amplifier stage is produced modularly, in the case of developments concerning the technology or the sound they can be exchanged by unplugging.
The integrated toroid transformer with a “Super Silent material” which is low magnetic field and hum less runs even very well in the case of unclean voltage. Again the mains-part was very much considered. It consists mainly of four separate mains-parts and contains for the supply of the amplifier stage a special connection, which always allows a low source resistance in the case of higher frequency . That way the distortion occurring also in the high-sound-sphere will be minimised and the sound seems to be less rough comparing to the use of usual connections.
Specifications:
Bandwidth: 1 Hz – 200 kHz (± 3 dB)
Distortion: < 0.02 %
Channel Separation : < – 80 dB (1 kHz )
Signal to Noise Ratio: < – 98 dBA
Input Impedance: 47 kOhm
Inputs: 6 x Cinch, 2 x XLR, 1 x Cinch Effect
Outputs : 1 x Cinch , 1 x XLR , 2 x Cinch Record, 1 x Cinch Effect
Effect Path: 1 x Cinch
Headphone Output : 1x Phone Jack 6.3 mm > 200 Ohm
Dimensions : 440 (W) x 350 (D) x 89 (H) mm
Weight: 8.1 kg