Thorens TD-110 Turntable

Here we have a vintage turntable from specialists Thorens with super cool late 70s styling. The TD 110 is probably one of lesser known models but is still capable of producing a fine sound. Our unit is in fully working condition, with some age related marks. It will be suitably packaged and is supplied with our regular three month warranty.
Thorens Say…
The Thorens TD 110 is a manual turntable that is representing the advanced “state of the art” design of Thorens turntables.
It incorporates the newly developed “ortho-inertial” suspension system for the floating chassis and the improved Isotrack tone arm with fully shock-protected jewel bearings. The spring suspended bearings flex in all directions and so prevent any possible damage to the arm from external forces.
Specifications:
Drive System: One step belt-drive
Motor: DC motor with 72pole tachogenerator
Speeds: 33.3 and 45 rpm electronic speed selection
Motor Speed Control: Electronic regulation with load correcting automatic pitch control
Pitch Control: ± 6% illuminated stroboscope
Turntable Platter: 1.3 kg zinc alloy dynamically balanced
Platter Diameter: 300 mm
Wow And Flutter: ≤ 0.05%
Rumble: Unweighted: – 48 dB; Weighted: – 88 dB
Tone Arm TP30:
Cartridge Wand TP 70
Tone Arm Length: 222 mm
Effective Mass: 7.5 g
Stylus Overhang: 15.5 mm
Offset Angle: 23°
Lateral Tracking Error: ≤ 0.18°/cm or radius
Skating Compensation: Magnetic force without friction
Stylus Pressure Appliance: Setting scale on the counter weight
Bearing Friction: ≤ 0.15 mN (15 mp) in both planes
Capacitance Of Cable: 230 pF ± 10%
Mains Voltage: 117/220 V, 50/60 Hz
Power Consumption: 5 W
Dimensions: 445 (W) x 355 (D) x 130 (H) mm; 400 (H) mm lid open
Weight: 6.2 kg