PurePower+ 1500 Power Regenerator

Here we have a power regenerator from Canadian company PurePower. Said to produce “a new, clean sine wave”, “so there is no opportunity for outside influences to introduce unwanted waveform distortions.” Our PurePower+ 1500 can provide power for up to seven electronic items and comes in fully working condition with original packaging, manual and mains cable.
PurePower Say….
Here at PurePower, we believe that the sounds and images that come from your system should be the ones that were introduced intentionally – not those that arrived unintentionally from your utility or through your house wiring.
The PurePower Audio Power Supply (APS) provides pure regenerated power for your sensitive home theatre and audio equipment. This is accomplished through our double conversion technology. We convert the incoming AC power to produce a clean DC supply, then recreate a new AC wave form with proper voltage and frequency from the DC. We make sure that your system gets the power it was designed for and your amplifiers get the current they need for top performance.
The APS also protects from power disturbances including power sags, power surges, overvoltage, line noise, undervoltage, frequency variations, switching transients and harmonic distortion. Power disturbances have the potential to damage sensitive hardware causing expensive repairs with either catastrophic failures or degradation over time through chronic overheating. With the APS you can safely eliminate the effects of power disturbances and guard the integrity of your equipment.
In addition to pure power, the APS provides you with something unique in audio power regenerators – protection against power outage. The APS maintains full wattage output even when the power fails completely.
Providing outstanding performance and reliability, the PurePower’s unique benefits include the following:
True double conversion AC regeneration design with pure sine wave output. The APS filters and regulates incoming AC power, creates a DC source, then regenerates new pure AC and provides monitored, consistent power to your components.
The APS improves amplifier performance by ensuring full wattage and improves signal component output quality by removing noise and distortion.
The PurePower APS design allows any of our high quality, full contact receptacles to supply digital, analogue or amplifier components.
Hours of extended viewing or listening time with optional APS PowerPack Modules during outages.
Built in line surge protection guards against spikes and surges on coax, RJ11and RJ45 lines.
USB communication port allows the APS to be integrated into whole home systems.
Specifications:
Nominal Voltage: 230 VAC
Voltage Range: 100 – 300 VAC
Frequency: 50 / 60 Hz Auto-sensing
Frequency Range: 40 – 70 Hz
Input Connection: IEC 320-C19 Input receptacle
Input Power Factor: > 0.95 @ nominal voltage
Earth Leakage: 3.5 mA, Max
Output Voltage: 230 VAC (208/220/230/240 VAC – User selectable)
Voltage Regulation: ± 1% of nominal
Output Frequency: 50 or 60 Hz – user selectable
Frequency Regulation: ± 0.5%
Efficiency: 88 – 92% depending on load
Standby Power Consumption: 10 watts
Output Power: 1350 watts continuous / 1750 short term (2 min.) / 2700 (10 sec.) / 6750 (inst.)
Dimensions: 432 (W) x 432 (D) x 133 (H) mm
Weight: 19.05 kg